Respicefinem PEI Spring Steel Plate with Dual Sided Coating for Ender 3 3 Pro 3D Printer Ideal for Multiple Filaments and Printing Tasks Size 235mm Golden

Item Type: PEI SheetMaterial: SteelColor: GoldenProduct Size: Approx. 235 x 235mm / 9.3 x 9.3inApplicable Machine: For Creality ENDER-3, for Ender-3S, for Ender-3 Pro, for Ender-5 TePrint Reference Temperature: 1.PLA: (both sides are fine)Hot Bed: 50-60℃Nozzle: 200-210℃Hot bed 60℃, nozzle 210℃2. ABS (powder surface is recommended. After temperature exceeds 80℃, the smooth surface is easy to foam)Hot Bed: 70-120℃Nozzle: 240-250℃3. PETG: (both sides are fine)Hot Bed: 60-85℃Nozzle: 230-245℃4. Carbon fiber (both sides are fine, very close to PLA, hardened steel is recommended for the nozzle)Hot Bed: 50-60℃Nozzle: 200-220℃5. TPU: (both sides are fine)Hot Bed: 50-60℃Nozzle: 200-220℃Hot bed 60℃, nozzle 220℃6. Wood (both sides are fine, very close to PLA): Hot Bed: 50-60℃Nozzle: 200-220℃Package List：1 x PEI SheetNote:1. The steel plate is an elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the platform and wear out the sprinklers.3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gap between the nozzle and the steel plate should be about a piece of A4 paper.4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.5. Add a skirt when printing a model with a small surface.

• Dual - Sided Coating: The steel plate features a double - sided coating, one side is gold powder and the other is smooth PEI It allows a single plate to meet two different printing requirements
• Easy To Use: This double - sided coated bed sheet is extremely user - friendly You just need to place it on your heating bed and both sides can be used directly
• Size: With a size of 235x235mm, it's suitable for the same size building board It adheres well to the printing surface and makes it easy to remove the printed matter
• Flexible Spring Steel: The PEI plates are made of excellent spring steel When slightly bent, they won't kink or warp
• Easy To Detach: Once the heating bed cools to room temperature, the printed part will easily fall off the surface If it's stuck, gently bending the plate helps with removal